Pipette controller Eppendorf Pipet Helper®
Comparable light in weight and reduced pressing powerEasy maintenance and cleaning due to easy dismounting, few parts and fully autoclavabilityComfortable working because of the good balance and pleasing materialThe aspirating bulb enables pipetting of volumes up to 100ml at onceSingle lever controls low force aspirating and dispensingHigh control over the liquid movement due to very sensitive valve unitDrop wise dispensing and blow out without splashingDrainage without any additional pressure delivers very reproducible resultsDrip stop via hydrophobic membrane filter (3µm)The special silicon pipet adapter guarantees a secure pipette fit
Pipette controller MACROMAN®
MACROMAN® is a reliable pipette controller for glass and plastic serological pipettes from 0,1 to 100 ml. Aspirating and dispensing speed can be set using pressure sensitive triggers or by using the thumbwheel while pipetting. The speed is adjustable up to 25 ml in less than three seconds. The screen continuously displays battery status and the aspiration and dispensing speed setting.Ergonomic handleWith side standLithium-Ion batteryScope of supply: Pipette controller, user guide, universal power supply (4 adaptors), charging desk stand, wall mount stand, extra hydrophobic sterile filter 0.22 µm
Pipette controller pipetus® standard
Electric pipette controller for all commercially available pipettes from 0.1 to 200 ml. Ideal for working in a fume cupboard, as the hand and pump parts are functionally separated. The handle is particularly ergonomic and lightweight. Functional work is possible with both “Ex” and blow-out pipettes. The pipetting speed can be adjusted from 0.1 to 1.94 ml/s on the pump module. The built-in safety valve effectively prevents penetration of liquid into the device or handle. The supplied PTFE membrane filter with a pore size of 0.2 µm provides reliable protection against overfilling. Autoclavable at 121 °C (without PTFE membrane filter)Scope of supply: Pipette controller, pump, safety valve, 2 x PTFE filter
Pipette controller pipetus® standard, with pump filter
Electric pipette controller for all commercially available pipettes from 0.1 to 200 ml. Ideal for working in a fume cupboard, as the hand and pump parts are functionally separated. The handle is particularly ergonomic and lightweight. Functional work is possible with both “Ex” and blow-out pipettes. The pipetting speed can be adjusted from 0.1 to 1.94 ml/s on the pump module. The built-in safety valve effectively prevents penetration of liquid into the device or handle. The supplied PTFE membrane filter with a pore size of 0.2 µm provides reliable protection against overfilling. Autoclavable at 121 °C (without PTFE membrane filter)The pipette controller is supplied with an additional filter mounted on the pump module.Scope of supply: Pipette controller, pump with filter, safety valve, 2 x PTFE filter
Pipette controller RF1000
Manual pipette controller that is uniquely designed for one-handed operation. Simply squeeze the main bulb and push the toggle forward to aspirate or back to dispense. Push the blowout bulb to expel any liquid remaining in the pipette. Ergonomic handle.Replaceable tapered silicone rubber pipette adapter allows a large range of pipette sizes ranging 1 to 100 mlWith replaceable 0.45 µm hydrophobic filter to protect samples and internal componentsAutoclavable nose cone assembly
Pipette controller VITLAB pipeo®
For all pipettes from 0.1 to 200 ml.Ergonomic handle, very light weight of ca. 190 gSpeed can be adjusted easily, continuously and exactly with one hand using 2 buttonsA 50 ml pipette can be filled in less than 10 secondsLiquid release can be done either by gravity delivery when calibrated ''Ex'' (to deliver), or in blow out mode using the battery-operated motorNickel-metal hydride battery allows approx. 8 hours of non-stop pipettingCharge level of the rechargeable battery is shown by the LED indicator (changes from green to red two hours before the battery must be recharged)Scope of supply: Pipette controller incl. battery charger (100-240 V, 50/60 Hz), 4 plug adapters (EU, UK, US/J, AUS), battery, battery compartment cover, two replacement 0.2 µm membrane filters and instruction manual
Pipette controller, pipetus® junior
Low cost, manual pipetting aid (no mains connection). Simple, safe and accurate. For all commercially available volumetric and graduated pipettes from 0.1 to 200 ml. Weighing only 130g, it ensures comfortable, ergonomic and problem-free pipetting. Each time the 'pump' button is pressed approximately 2 ml of sample fluid is drawn up. When the 'out' button is pressed the liquid is gently released via an accurate valve system with the amount of pressure exerted on the Blow-out button determining the speed of release. Blow-out pipettes can be fully emptied by pressing another button on the back of the unit. A standard PTFE membrane filter prevents overfilling.Supplied with: pipetus® junior with 2 round PTFE filters, sterile
Pipette controller, Profiller™ manual 437
For glass and plastic pipettes with a volume up to 100 ml.With large suction ballSoft action lever buttonEfficient blow-out systemPTFE protection membrane filter, exchangableAlternative colour-coded cones (white, blue, green)
Pipette controllers macro 0.1 to 200 ml
One single macro pipette controller covers the entire range of bulb and graduated pipettes from 0.1 to 200 ml.The conical silicone adapter offers a secure fit for the different diameters. The unique valve system allows for easy compression of the bellows. The spring loaded lever enables an even more sensitive filling and delivery of liquids. The meniscus is easily adjustable. The unit is fully autoclavable at 121 °C (2 bar) according to DIN EN 285. A hydrophobic membrane filter protects the system from liquid penetration.Scope of supply: pipette controller, 3 µm spare membrane filter
Pipette controllers, micro-classic
Thanks to its ergonomic design and easy handling, the micro-classic pipette controller provides the comfort needed for difficult work under the microscope. Suitable for disposable micropipettes with ring marks and other microlitre volume pipettes with a capacity up to 1 ml. Suitable for left, or right-handed operation. The adapter and suction tube are autoclavable at 121 °C.
Pipette Filler, pipetus®
The pipetus® is ergonomically sophisticated in every detail despite most modern technology, powerful and light-weight. Fits graduated, volumetric and Pasteur pipettes from 0.1 ml to 200 ml. Without reloading it can be operated up to one week. The colour display shows the selected defaults (speed) and the current battery capacityAutomatic inductive charge in the park station guarantees constant readiness Controlled pipetting by a simple push of a button EX/Blow out switch for precise operating Speed key for 5 operating speeds No memory effect by inserted microcontroller Clear colour display with permanent display Optimal meniscus adjustment by sensitive valve technique Standard relief valve against penetration of liquid Ergonomic design for fatigue-free serial pipetting Power supply 100-240 V, with EU, UK, US plugsSupplied with:pipetus®complete with mains operated charging unit and inductive charging stand, color display with battery level indicator, 2 additional round PTFE filters, additional safety valve and wall mount.
Pipette Fillers Profiller™ 447
Electronic pipette filler which allows longer and fatigue-free pipetting due to comfortable hand adjustment. Shape is ideal for working with glass or plastic pipettes. A powerful, quiet motor and a switch to set both aspiration and dispensing speeds enable maximal working efficiency even with large pipetting volumes.Powerful pump (fills 25 mL in 3 seconds)Comfortable finger triggersLow battery lightNiMH battery rechargeable during useInterchangeable protection membrane filterScope of delivery: Pipette filler Profiller™ 447, power supply, four plug adaptors (EU, US/JP, GB, AUS/NZ), two spare hydrophobic filters (0.45 µm and 0.2 µm), bench and wall stands and instruction manual.
Pipette Fillers S1
A lightweight, wireless pipette filler that allows longer and fatigue-free pipetting. For use with graduated and volumetric serological pipettes made of glass or plastic. Separate control of aspirating and dispensing speeds allows precise control of pipetting speeds and reduces the risk of overpipetting for smaller pipettes and volumes.Separate switches for aspiration and dispensingLarge backlit LCD display with indication of remaining battery life and speed settings8 speed levelsQuick charge function (fully charged after 3 hours)Individual labelling fieldSuitable for wall mounting or table standWith pipette adapter for the use of 1 ml pipettesScope of delivery: S1 pipette filler, universal charger, table stand, holder for wall mounting, 1 ml pipette tray, operating instructions and warranty card
Pipette holder Eppendorf
For pipette carousel or wall mounting, incl. adhesive tape, without charging function.
Pipette holder for multichannel pipettes, GFP/Hastelloy C
Space-saving pipette holder for 8- or 12-channel pipettes.
Pipette holder SINGLE™, PC
For holding a single or multichannel PIPETMAN® pipette. The pipette holder adheres strongly to any smooth, dry surface or may be fastened with screws.
Pipette Leak Testing Unit
Improved process reliability with functional validation of air-displacement pipettes.The most frequent cause of inaccuracy in piston-operated pipettes is leakage. This arises from damage either to the seals, pistons or tip cones. Often not detectable by the naked eye, leaks lead to significant volume errors.The BRAND pipette leak tester (PLT unit) for air displacement pipettes finds even the smallest leaks within seconds.Limit values for the commercially available single- and multichannel pipettes in the volume range 1µl to 10ml are pre-programmed.Testing with and without tips Test results in secondsPatent pendingAccording to monitoring of measuring instruments, air-displacement pipettes must be checked at regular intervals and the results must be compared with the ISO 8655-2 error limits. However, a calibration certificate only reflects the results at the time of testing. The time between these calibrations is crucial, since leaks can occur at any time. Well over 80% of pipettes sent in for repair have leaks and are outside their volume tolerances, even if they don't drip.While the PLT unit cannot replace regular gravimetric testing, daily pipette checks can provide a safeguard during the periods between calibrations. Even the smallest leaks are detected. Process reliability for the pipettes is thus significantly improved.Items supplied:PLT unit (Pipette Leak Testing Unit) including one adapter each for testing air-displacement pipettes with tip (mounted) and without tip, 2 plugs, 3 replacement PE filters for the pipette adapters, universal AC adapter, quality certificate and operating manual.
Pipette reservoirs, PP
These reagent reservoirs were designed especially for use with automated liquid handling platforms. They can also be used with manual systems. Different partitions, bottom styles and profiles provide broas application flexibility.ANSI/SLAS standard format Compatible with nearly all liquid handling robots and other automated dispensing systemsDifferent types for use with multichannel pipettes and automatic systemsExcellent stability and chemical resistance made from high-quality polypropyleneFree from RNases and DNases, autoclavable (121 °C, 20 min)
Pipette rinser system
For easy and gentle cleaning of pipettes according to the suction lifter principle. A complete rinsing system consists of pipette washer, pipette soaking jar and pipette basket, please order separately. Heat resistant up to 105 °C, good chemical resistance.Pipette basket: For holding pipettes up to 600 mm or burettes acc. to Mohr. The basket is equipped with a handle and a height-adjustable ring. The bottom of elastic PE reduces the risk of damage to the pipettes.Pipette soaking jar: For pre-cleaning of the pipettesPipette rinser: For rinsing the pre-cleaned pipettes. The emptying siphon permits constant water exchange. The water inlet should be approx. 2 l/min.*with handle
Pipette stand for electronic single and multichannel microliter pipettes E1-ClipTip™
With universal power supply.
Pipette stand for Finnpipette™
Pipette stands, grey, made of two solid supports and an aluminum crossbar for 3 or 6 single-channel pipettes.Can also be used for multi-channel pipettes.