Petri dishes, DUROPLAN®, borosilicate glass 3.3
DURAN®. With lid.Petri dishes are manufactured in a special production process which results in an even media dispersion and a uniform cell growth. Bottom and lid are absolute planar and free from bubbles and cords.Glass Type I / neutral glass as per USP, EP and JP. Autoclavable. DIN 13132.
Petri Dishes, PS
Suitable for culturing of fungi, bacteria and other microorganisms. For sampling in hospital environments (for research use only), as well as in the food science and the pharmaceutical industry. All dishes perform well in automatic dispensers due to complete flatness and uniform height.
Petri dishes, PS
For bacteriology. With or without vents. In light or heavy duty versions.
Petri dishes, PS, square, with triple vents
For routine lab work and research.With aeration notches on the lid.
Petri dishes, PS, sterile
Made of transparent polystyrene, gamma-irradiated.Heat resistantStackableWith or without vents
Petri dishes, PS, with 2 sections
For routine lab work and research.For routine lab work and research.
Petri dishes, PS, with 3 sections
For routine lab work and research.For routine lab work and research.
Petri dishes, PS, with 4 sections
For routine lab work and research.For routine lab work and research.
Petri Dishes, PS, with grid
Suitable for culturing of fungi, bacteria and other microorganisms. Contact dish (with grid) useful for sampling in hospital environments (for research use only), as well as in the food science and the pharmaceutical industry. All dishes perform well in automatic dispensers due to complete flatness and uniform height.
Petri dishes, PS, with triple vents
For routine lab work and research.With aeration notches on the lid.
Petri dishes, PS, without vents
For routine lab work and research.For routine lab work and research.
Petri dishes, soda-lime glass, with lid
Interior and exterior of base and cover evenBubble and streak freeCut edges flame polished
Petrifilm® Environmental Listeria Spreader
The Neogen® Petrifilm® Large Square Spreader is compatible with the Neogen® Petrifilm Environmental Listeria Plates.Design easily spreads inoculum over uniform areaThe spreader is reusable and does not contact plating surface or sampleClear acrylic material allows the technician to observe and control spread
Petrifilm® Flat Spreader
This spreader is compatible with the following Neogen® Petrifilm® Plates: Aerobic Count Plates, Coliform Count Plates, Rapid Coliform Count Plates, Enterobacteriaceae Count Plates, E. coli/Coliform Count Plates, and Aqua Heterotrophic Count Plates.Design easily spreads inoculum over uniform areaThe spreader is reusable and does not contact plating surface or sampleClear acrylic material allows the technician to observe and control spread
Petrifilm® High-Sensitivity Plate Spreader
Spreader used to distribute the sample evenly for Neogen® Petrifilm® High-Sensitivity Coliform Count Plates.Design easily spreads inoculum over uniform areaThe spreader is reusable and does not contact plating surface or sampleClear acrylic material allows the technician to observe and control spread
Petrifilm® Standard Spreader Assembly
This spreader is compatible with the following Neogen® Petrifilm® Plates: Aerobic Count Plates, Coliform Count Plates, Rapid Coliform Count Plates, Enterobacteriaceae Count Plates, E. coli/Coliform Count Plates, and Aqua Heterotrophic Count Plates.Design easily spreads inoculum over uniform areaThe spreader is reusable and does not contact plating surface or sampleClear acrylic material allows the technician to observe and control spread
Pierce Seal
For PP and PS microplates. Excellently piercable. Not peelable. Very good solvent / DMSO resistance.Application:Compound storage, PCRAutomated workflows:Piercing and oversealing possibleSealing:2 to 3 sec 170 to 175°CSeal Integrity:-80°C to +120°C.
Plasmid Purification-Kits High-Speed / Fast Ion
For rapid and efficient extraction of plasmid DNA from bacterial cells.The method is based on a combination of alkaline lysis and RNase treatment to obtain a clear lysate with minimal genomic DNA and RNA contamination. The bound plasmid DNA is washed and finally eluted by adding a buffer.SpecificationsMini Kit // Midi KitMethod:Spin column // Anion-ExchangeSample size:1 - 5 ml // 50 ml high-copy plasmid / 100 ml low-copy plasmidBinding capacity:30 µg // 800 µgFragment size:1 - 15 kb // 1 - 20 kbTypical yield:10- 30 µg // 200 - 800 µgOperation Time:15 min. // 120 min.
Plasmid Purification-Kits I-Blue Mini / Midi
For rapid and efficient extraction of plasmid DNA from bacterial cells.The method is based on a combination of alkaline lysis and RNase treatment to obtain a clear lysate with minimal genomic DNA and RNA contamination. The bound plasmid DNA is washed and finally eluted by adding a buffer. The test kit contains the I-Blue Lysis Buffer, an optional colour indicator. The use of this indicator prevents common handling errors that impair efficient cell lysis and neutralization.Fast extraction timeHigh yieldPrevention of handling errors during cell lysis and neutralisation by I-Blue colour indicatorSpecificationsI-Blue Mini Plasmid Kit // I-Blue Midi Plasmid KitMethod:Spin column // Anion-ExchangeSample size:1 - 7 ml // 50 - 100 ml high-copy plasmid / 100 - 150 ml low-copy plasmidBinding capacity:50 µg // 500 µgFragment size:1 - 15 kb // 1 - 20 kbTypical yield:up to 50 µg // 200 - 500 µgOperation Time:15 min. // 80 min.
Plasmid Purification-Kits Maxi Fast Ion
For rapid and efficient extraction of plasmid DNA from bacterial cells. The method is based on a combination of alkaline lysis and RNase treatment to obtain a clear lysate with minimal genomic DNA and RNA contamination. The bound plasmid DNA is washed and finally eluted by adding a buffer.Fast extraction timeHigh yieldStandard version or endotoxin-free version (<0.10 EU/µg) availableSpecificationsMethod:Anion-ExchangeSample size:200 - 800 ml high-copy plasmid / 500 - 1600 ml low-copy plasmidBinding capacity:1.5 mgFragment size:1 - 20 kbTypical yield:1 - 1.5 mgOperation time:180 min.