Base tray for spring clamps
The base tray can be equipped with spring clamps of different sizes and used for tempering Erlenmeyer flasks in shaking water baths.Please order spring clamps for fastening Erlenmeyer flasks separately.
Base tray for test tube racks
The base tray can be equipped with a max. of 4 test tube racks and used for tempering test tubes in shaking water baths.Please order test tube racks separately.
Clamps for Erlenmeyer flasks for Shaking water baths Hydro
Clamps to be placed on the shaking tray.
Lid for Erlenmeyer flasks for Shaking water baths Hydro
Raised lid for Erlenmeyer flasks with 1000 ml.
Lids for shaking water baths SW
Hinged lids protect against contamination and loss of liquid through evaporation.
Liquid level/cooling set for water baths PURA™ and shaking water baths SW
The Liquid level/cooling set can be used both to keep the water level constant and for counter-cooling for temperature control tasks close to ambient temperature. For this purpose, cool tap water is continuously supplied to the water bath, while at the same time heated water is drained via the overflow.
Shaking tray, stainless steel for Shaking water baths Hydro
With holes to accept clamps for Erlenmeyer flasks and tube holders.
Shaking water bath OLS 26 Aqua Pro
A combined orbital/linear shaking bath for ultimate flexibility and usability. Combined orbital/linear motion in one bath, simply rotate tray carrier 180°Excellent temperature stability and uniformity of ±0.1 °CAdjustable shaking speed/intensity for application optimisationOrbital shaking radius: 9 mmLinear shaking stroke length: 18, 28, 36 mmSet and Forget™ technology - fast heat-up accurate temperature controlExtensive choice of trays for a wide variety of vessels. Trays sold separatelyIncludes adjustable high temp cut-off/alarm, countdown timer (1 to 999 min), presets, calibration facility and dry start/run dry protectionDiscreet magnetically coupled shaking mechanism maximises working areaUniversal frame and polycarbonate lid includedAccessory polypropylene spheres or a lid must be used at temperatures between 60 °C and 99 °C. Accessory cooling is required for temperatures below ambient. Please order PP spheres separately.
Shaking water bath SW
For simultaneous heating and shaking of samples, e.g. incubations, hybridizations etc.Microprocessor technology with PID temperature controlBright Multi-Display (LED) indicates five different temperature values and shaking speedSplash-proof mains switch, built into plastic membrane keypadEasy-to-use controlsTimer for selecting desired operating periodRS232 interface providedShaking frequency 20 to 200 strokes/min., with 15 mm strokeRemovable shaking carriageModel SW23 has an internal circulation pumpBath lid not included.
Shaking water baths Hydro
With their excellent temperature homogeneity, the universal Hydro shaking water baths are designed for the needs of biological, medical or biochemical laboratories. The models H 20 S and H 20 SW shaking water baths have a linear, oscillating shaking movement, while model H 20 SOW moves the sample in an orbital motion.For boiling range applicationsLED displaySpeed controller for load-independent, continuously adjustable shaking movementSoft, controlled start of the shaking movementDry run protection (safety class I, NFL)Maintenance free and reliableH 20 SW and H 20 SOW with integrated cooling coilScope of supply: Shaking water bath, stainless steel lid, shaking insert, drain tapPlease order trays, attachments and accessories separately.
Shaking water baths LSB Aqua Pro
Reliable linear shaking mechanism for consistent resultsExcellent temperature stability and uniformity of ±0.1 °CSimple controls, clear, bright displaySet and Forget™ technology, fast heat-up accurate temperature controlExtensive choice of trays for a wide variety of vessels. Trays sold separatelyDiscreet magnetically coupled shaking mechanism maximises working areaAdvanced dry start / run dry protection, prevents costly service repairsUniversal frame and polycarbonate lid includedAccessory polypropylene spheres or a lid must be used at temperatures between +60 °C and +99 °C. Accessory cooling is required for temperatures below ambient. Please order PP spheres separately.
Spring clamps for Erlenmeyer flasks
The spring clamps can be used to securely fasten Erlenmeyer flasks to the base tray. In combination with the separately available base tray, suitable for tempering tasks in a shaking water bath.
Test tube racks for shaking water bath, SR series
Stainless steel, 200 x 75mm. The OLS 26 holds up to 5 SR racks, LSB12 holds up to 3 SR racks and LSB18 holds up to 5 SR racks. Choice of 8 variants to accommodate different tube diameters and microtubes.
Test tube racks for shaking water baths SW, PP
Test tube racks made of PP. In combination with the separately available base tray, suitable for tempering test tubes in shaking water baths.
Test tube racks for shaking water baths SW, stainless steel
Test tube racks made of stainless steel. In combination with the separately available base tray, suitable for tempering test tubes in shaking water baths.
Test tube racks for water baths PURA™, shaking water baths SW and heating circulators CORIO™
Test tube racks made of plastic.Suitable for heating thermostats CORIO™ C and CD with the bath types B13, B17, B19, BT19, B27, BT27, B33.
Trays for Erlenmeyer flasks
Trays made of stainless steel for secure positioning of Erlenmeyer flasks in the shaking water bath.
Trays for shaking water baths OLS/LSB series
Versatile stainless steel trays. Designed to accommodate a variety of vessels. Adjustable spring configuration for maximum flask capacity.
Trays with test tube racks
Trays with test tube racks made of plastic (PP GF and PA GF) for tempering test tubes in shaking water baths.
Tubes inserts, stainless steel for Shaking water baths Hydro
Inserts to be placed on the shaking tray.