Access port with silicone plug for CO2 incubators CB series
Access port 30 mm with silicone plug.
Accessories for CO2 Incubators ICOmed
Battery-buffered ControlCOCKPIT - Uninterrupted supply for the entire display unit (ControlCOCKPIT) and therefore complete documentation of all parameters even when there is a power failure. The CO2 parameter is continuously regulatedTwo gas connections with quick release connectors for automatic switch-over of gas cylindersActive microprocessor control for humidifying and dehumidifying (40 - 97 % rh), incl. digital indication and auto-diagnostic system ensures even more rapid reaching of set humidity and very short recovery times while avoiding condensate formation. Humidity supply with distilled water (from an external tank) by a self-priming pump; integral bacteria block by generating hotsteam, dehumidifying via sterile filterControl of oxygen concentration by N2 inlet; adjustment range 1 % up to 20 % O2;Peltier cooling unit, enables a working temperature of 37 °C even at higher ambient temperatures of up to 35 °CFurther options and accessories, f. ex. special works calibration certificates, subframes, pressure reducing valves on request.
Accessories for CO2 Incubators INCOmed
Comfort module:two gas connections with quick release connectors, automatic switch-over gas cylinders (impossible in combination with O2module)Hygiene module:electropolished interior, seamlessly welded by laserCommunication module:USB interface, "Celsius" standard software for the control and logging of temperature, CO2; O2 (with O2 module) and relative humidity; internal log memory 1024 kB as ring memory for all setpoint values, actual values, errors, settings with real time and date: logging approx. 3 months at 1 min. logging interval; parallel printer interface for all PCL3-compatible printersCO2 module:extended CO2 range from 0 to 20%Premium module:includes Comfort, Hygiene, Communication and CO2module (impossible in combination with O2 module)O2module:control of oxygen concentration by N2 inlet, adjustment range 1% bis 20% O2, setting accuracy 0,1%Combination O2 module with Comfort and Premium module impossible
Alternative O2 control range for CO2 incubators CB / CBF
For controlling O2 concentrations between 10 and 95 vol. % in CO2 incubators.Only in conjunction with model variants with O2 control.
Base frames for CO2 incubators CB series
The base frame equipped with casters is used for the secure positioning and leveling of CO2 incubators.
Cell Culture Flasks EasyFlask™, non-treated, PS/HDPE, pyrogen-free
Non-treated, sterile flasks for suspension cell cultures. White caps for easy identification. Pyrogen-free.Material flasks: PolystyreneMaterial caps: HDPE
Cell Culture Flasks TripleFlask™, non-treated, PS/HDPE, pyrogen-free
Non-treated, sterile flasks for suspension cell cultures. White caps for easy identification. Pyrogen-free.Material flasks: PolystyreneMaterial caps: HDPE
Cell Locker™ chambers for CO2 inkubator Heracell™ VIOS™ 160i
Transparent. Each Cell Locker™ holds 9 each T-75 cell culture flasks, 20 each 6-well plates, or 24 each 96-well plates. The Cell Locker™ can be manually disinfected or can be autoclaved a maximum of 12 times.Tapered box for easy installation into incubatorEasy and secure one handed latch and pullNon-slick sliding tray with tip protectionRemovable cover for protected transportMembrane filter (0.2 µm)
CO2 incubator ICO
The CO2 incubator is ideal for biosynthesis as well as the cultivation of cells, bacteria, and tissues in the laboratory. Thanks to turbulence-free chamber ventilation, a consistently homogeneous atmosphere is ensured.User-friendly, intuitive operating conceptControlCOCKPIT: TwinDISPLAY with 2 high-definition TFT colour displaysUSB and Ethernet interfaceSterilisation of the interior including all installations and sensors at 180 °C in 60 minutesMultifunctional all-round heating with additional door and rear wall heatingFail-safe FDA-compliant data loggingVisual and acoustic alarm as well as alarm notification when individually adjustable corridors are exceededRounded corners enable easy and thorough cleaning of the interior
CO2 Incubator Midi 40 with small volume
The Thermo Scientific Midi 40 CO2 incubator is designed specifically for cell culture scientists who require a compact culturing workspace to handle small workloads, perform personal use applications, or simply address limited space environments. With its 1.4 cu ft (40 l) capacity, the Midi 40 adds a new dimension to the Thermo Scientific portfolio of leading CO2 incubation solutions. It delivers the performance and capabilities of full-sized incubators in a space-saving footprint, ideal for those who wish to avoid shared-use environments that can present potential contamination risk through unnecessary sample handling and repeated door openings. Easy to operate and economical to own, the fully featured Midi 40 offers remarkable value in a small footprint.Advanced IntrLogic™ II microprocessor: bright digital display and intuitive touchpad for simplified entry of temperature, CO2 and alarm data, with keyed setpoint switch to prevent unauthorised changes to your operating parameters.Stainless steel culture chamber: seamless, non-corrosive and exceptionally easy to clean. The Midi 40 is provided with four removable shelves.Highly efficient direct heating design: provides even heat distribution to all sides of the chamber, for accurate control with uniformity of +/- 0.1 °C.Precise and reliable CO2 control: featuring accurate thermal conductivity sensor located directly in the chamber, ensuring responsive control and long service life.Removable water reservoir: generates relative humidity values up to 95 % with rapid recovery rates that promote optimal cell growth.Heated inner glass door: provides sample security while preventing unwanted condensation.Convenient data communication: RS-485 signal output is standard, in addition to audible and visual alarm functions to ensure proper operations.
CO2 incubator, BBD 6220
BBD 6220 provides stable growth conditions and a high degree of security and protection against contamination. Typical applications are for IVF or pathogenic work. Range: ambient + 5 °C to 50 °C, humidity greater than 95 % R.H. and CO2 concentrations between 0 and 20 % Vol are reliably achieved via a microprocessor controlled measuring and control system. An automatic disinfection routine at 180 °C, which safely eliminates bacteria, fungi and spores, decontaminates the entire interior space including the sensors and fittings. The humidity water reservoir is located outside the chamber. The water is sterilised before it is used for humidification. The stainless steel chamber is crevice-free with rounded corners for easy cleaning. Includes "Heraeus CO2 Autozero System" overtemperature protection with separate probe and RS232 interface.
CO2 incubators CB
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactHumidification system with condensation protectionTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
CO2 incubators CB-O, with O2 control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactHumidification system with condensation protectionTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
CO2 incubators CB-S
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactHumidification system with condensation protectionPID controller with LCD display
CO2 incubators CBF, with humidity control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactContamination-safe humidification system without water panTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
CO2 incubators CBF-O, with humidity and O2 control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactContamination-safe humidification system without water panTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
CO2 incubators CBF-OZ, with cell therapy compartmentalization, humidity and O2 control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactContamination-safe humidification system without water panTouchscreen controllerFail-safe CO2 system for protecting the pH of cell culturesInner door divided into 8 parts with cell therapy compartmentalizationStainless steel inner door with 8 separate glass doors4 shelf levels with 8 insertsIndividual inserts can be pulled out completelyEach level is physically separated by an additional partition wall
CO2 Incubators CelCulture® with copper interior/air jacket and ULPA filter
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderULPA filtration system with internal blower90 °C moist heat decon system
CO2 Incubators CelCulture® with high heat sterilization and ULPA filter
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderIncubator with 180 °C high heat sterilization cycle, for efficient contamination protection. Conforms to the international standards for dry heat sterilization.Heat-resistant sensorsIR CO2 sensorULPA filtration system with internal blower2 MB built-in flash memory for data and event logging
CO2 Incubators CelCulture® with high heat sterilization, ULPA filter and O2 control
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderIncubator with 180 °C high heat sterilization cycle, for efficient contamination protection. Conforms to the international standards for dry heat sterilization.Heat-resistant sensorsIR CO2 sensorO2 SensorULPA filtration system with internal blower2 MB built-in flash memory for data and event logging
CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderIncubator with 180 °C high heat sterilization cycle, for efficient contamination protection. Conforms to the international standards for dry heat sterilization.Heat-resistant sensorsIR CO2 sensor2 MB built-in flash memory for data and event logging