Adhesive film, Tesafilm 420-00 PV 6
Colourless.Transparent adhesive tape for label protection. Supplied in rolls as indicated.
Adhesive label tape
White. Manufactured from paper with special resin adhesive that resists to moisture and most solvents. Can be used between -5 to 110 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces and peels off without leaving any sticky residue. Accepts writing from almost all pen types such as pencil, ball point pen, solvent ink marker etc. Markings remain absolutely legible under the most demanding laboratory conditions. Rolls of 30 m.
Adhesive label tape Write-on™, writable
Specially coated plastic tape with adhesive backing. Makes labels of any length. Can be used with any pens. Excellent adhesion to glass, metal, PE, etc. Resistant to humidity, as well as acids and alkali solutions in weak concentrations. Leaves no residue when removed.
Adhesive label tape, set
Manufactured from colored paper with special resin adhesive that resists to moisture and most solvents. Can be used between -5 to 110 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces and peels off without leaving any sticky residue. Accepts writing from almost all pen types such as pencil, ball point pen, solvent ink marker etc. Markings remain absolutely legible under the most demanding laboratory conditions.Scope of supply:6 rolls (yellow, blue, green, red, orange, white) of 30 m
Adhesive labels
Manufactured from polypropylene flexible paper with acrylic resin adhesive back. This unique combination does not expand and retract together with temperature fluctuations and therefore always guarantees a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -96 to 121 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue.
Adhesive Labels, white
Self-adhesive labels for hand lettering or print on printing presses. Mounted true to register on sheets with gripper and feeder margin. Each pack contains 2 extra sheets for setting-up operations. Format of the sheets 168 x 120 mm. Length varies in accordance with label size. The sheet sizes and register, however, are absolutely identical for each type. Not suitable for PC printers.Made of wood-free paper (75g/qm)Chlorine-free bleached, FSC-certifiedSolvent-free adhesive
Adhesive tape dispenser Write-On™
For one roll Write-On™ adhesive tapeWith epoxy-coated steel writing platformWeighted base with non-skid pads prevents sliding or lifting76 mm core fits standard tape rolls up to 25 mm wide and accepts tape rolls having a maximum diameter of 133 mmAccepts 36.6 m as well as 54.9 m rollsDimensions (W x D x H): 213 x 87 x 95 mmDimensions of writing platform 102 x 152 mm
Adhesive tape dispenser Write-On™ Economy
Provides a smooth writing surface, making labeling easy and fast. When marked tape is advanced and cut off on the serrated edge, a fresh length of label tape is positioned on the writing platform. Plastic cutting edge is moulded into the housing. Various widths and colours of tape rolls can be mixed together on the spindles, which accommodates 5 or more 12 to 19mm narrow rolls or 4 x 25mm wide rolls. Spindles are easily removed from the unit for loading and unloading and can be adjusted to hold either 25 or 75mm core diameter rolls.Includes three plastic separating discs to assure smooth, snag free dispensing for up to four rolls of tape (additional discs on request).Moulded-in pen holder wells on the dispenser help to keep writing instruments handyIdeal for use with the full line of Write-On™ Tapes, which are available in 6 colors and 3 widths.Includes mounting holes for secure attachment to a benchtop (screws not included). Can also be attached to vertical surfaces using Wall Mount AdapterDimensions (W x D x H): 302 x 143 x 105 mmItems supplied: Adhesive tape dispenser incl. 1 roll of 12mm white Write-On™ Labeling Tape
Adhesive tape for label protection, PES
Transparent. With special synthetic adhesive. Resistant to moisture and most solvents. Test results prove the tape remains securely affixed with no discoloration after being autoclaved for 40 minutes at 125 °C, as well as after one week in liquid nitrogen at -196 °C. Excellent adhesion to glass, metal, PE etc.
Coloured Tapes for Thermotransfer printers 1024X / 1244 / 1344 / 1345
Ink side in.
Coloured Tapes R 7960 series
When printed on suitable Brady labels, the R7960 ribbon offers good solvent resistance (lower in alcohol), high print quality and excellent wipe resistance. Ink side out.
Coloured Tapes Type R7950 for Thermotransfer printers
The R7950 ribbon has excellent chemical and wipe resistance. In addition, a reliable and pin sharp print quality for optimum readability of barcodes. Ink side out.
Cryo barcode labels NitroTAG®
Cryo labels with thermoplastic film for labelling and marking of cryo vials, micro tubes, cell culture plates, microtitre plates and cryogenic boxes. These labels can be immersed in liquid nitrogen and withstand multiple freeze-thaw cycles. Compatible with all common thermal transfer printers for printing alphanumeric text, barcodes, serial numbers, serial barcodes and other informations.Waterproof labelsStrong, permanent cryo-adhesiveAdhesion even on moist, wet surfacesResist spraying and swabbing with alcohol and sanitizing wipesTemperature range -196 to 110 °C
Cryo labels Cryo-LazrTAG™ for laser printers, circular
The thermoplastic cryo labels in A4 sheet format have been specially developed for printing with laser printers. Ideal for labelling and marking vials, micro tubes and cryogenic boxes for quick identification of samples during storage in liquid nitrogen, freezers or transport in dry ice.Water- and tearproof labelsResistant to UV and gamma radiationStrong, permanent cryo-adhesiveA4 sheet formatTemperature range -80 to 120 °C
Cryo labels Cryo-LazrTAG™ for laser printers, rectangular
The thermoplastic cryo labels in A4 sheet format have been specially developed for printing with laser printers. Ideal for labelling and marking vials, micro tubes and cryogenic boxes for quick identification of samples during storage in liquid nitrogen, freezers or transport in dry ice.Water- and tearproof labelsResistant to UV and gamma radiationStrong, permanent cryo-adhesiveA4 sheet formatTemperature range -196 to 120 °C
Cryo labels Cryo-LazrTAG™ for laser printers, rectangular, set
The thermoplastic cryo labels in A4 sheet format have been specially developed for printing with laser printers. Ideal for labelling and marking vials, micro tubes and cryogenic boxes for quick identification of samples during storage in liquid nitrogen, freezers or transport in dry ice.Water- and tearproof labelsResistant to UV and gamma radiationStrong, permanent cryo-adhesiveColour sorted: white, silver, yellow, green, pink, blue, orange, redA4 sheet formatTemperature range -196 to 120 °C
Cryo labels CryoSTUCK®, circular
Developed for labelling laboratory consumables and containers such as vials, tubes and cryoboxes. These durable, solvent-resistant cryo labels adhere securely to frozen surfaces down to a temperature of -80 °C. Frozen containers can therefore be labelled directly without having to thaw the samples first. The labels also have a permanent adhesive that adheres securely even under extreme conditions, including prolonged storage in liquid nitrogen (-196 °C). Resistant to a wide range of laboratory chemicals, including detergents, alcohols, acetone, xylene and disinfectant solutions. Compatible with label printers DYMO® LabelWriter 550, 550 Turbo and 5XL.Developed for labelling laboratory consumables and containers such as vials, tubes and cryoboxes. These durable, solvent-resistant cryo labels adhere securely to frozen surfaces down to a temperature of -80 °C. Frozen containers can therefore be labelled directly without having to thaw the samples first. The labels also have a permanent adhesive that adheres securely even under extreme conditions, including prolonged storage in liquid nitrogen (-196 °C). Resistant to a wide range of laboratory chemicals, including detergents, alcohols, acetone, xylene and disinfectant solutions. Compatible with label printers DYMO® LabelWriter 550, 550 Turbo and 5XL.