Autosampler-vials, PFA
Raised graduation with 1 ml subdivisions. Translucent material. Conical interior.Delivered without lids. Please order the fitting lids separately.No memory effectsPractically no carryover due to the extremely hydrophobic, anti-adhesive, smooth surfacesHigh thermal stability, from -200 °C to 260 °CChemical inertness against nearly all chemicalsEasy to clean
Beakers, ETFE
Transparent. Good chemical resistance. With graduation, beaded rim and spout.
Beakers, Griffin, PFA
Griffin Beakers, PFA have a specially machined bottom designed for rapid, efficient heat transfer. They are transparent for easy viewing and graduated for easy measuring. They feature a non-stick, easy-to-clean surface.Can be heated up to 260°C and used in a microwaveIdeal for ultra-pure applicationsLow metal ion content for trace metal analysis
Beakers, low form, PTFE
With reinforced rim and spout. Ungraduated.Excellent chemical and temperature resistance.
Centrifuge tubes Nalgene™ Oak Ridge, FEP
Teflon® FEP with Tefzel® ETFE screw cap. Resistant to all acids, bases and solvents. Autoclavable. Operating temperature range -100 to +150°C. Can be used brim-full in refrigerated centrifuges at up to 50000xg rcf. Leak-proof. Accessory sealing cap assemblies are available for all sizes.Teflon® and Tefzel® are a registered trademark of DuPont.
Dropper bottle Nalgene™ Type 2414, FEP/ETFE
Teflon® FEP bottle with Tefzel® ETFE dropper and cap. Excellent chemical resistance. Autoclavable.Teflon® and Tefzel® are registered trademarks of DuPont.
Evaporating Dish PFA, with snap-on lid, PE
With snap-on lid, PE. For contamination free sample preparation and efficient transportation. Due to a conical depression in the middle of the base very small amounts of a solvent are adequate to absorb the evaporated samples.
Evaporating Dish, PFA
The PFA Evaporating Dish design promotes evaporation of excess fluids to produce a concentrated solution or solid precipitate. The flat bottom provides good surface contact with a heat source, while the non-stick angled walls direct fluids to the base, which limits condensation on the dish wall. This PFA dish can be used in a wide range of temperatures, from cryogenics to 260°C. The dish is also ideal for holding solid samples or small volumes of liquid. Features a broad spout for easy pouring.Chemically inertIdeal for trace metal analysisTransparent for easy viewingPerfect for microwave useSmooth, non-stick surface
Evaporating Dish, PTFE
This PTFE Evaporating Dish can be used to concentrate a solution or to create solid precipitates. The evaporating dish can also be used as a shallow bath, as a drying dish or as a beaker cover to protect contents from dust and other contaminants. PTFE material is unbreakable, chemically inert, and withstands temperatures up to 288°C. The non-stick surface is stain resistant and easy to clean. Features a broad spout for easy pouring.Chemically inertIdeal for ultra-pure samplesWithstands temperatures up to 288°C
Gas washing bottles, PFA
With cap with S40 screw thread and srewable frit made of PTFE. Approx. pore size 3 µm for optimal formation of gas bubbles into the liquid. Because all parts are made of high-quality fluorocarbon resins, a broad range of applications are possible. The threaded inlet and outlet connections accept 4 x 6mm i.d. x o.d. tubing , (1000 ml version: 5 x 8mm i.d. x o.d. tubing).
Gas washing columns, FEP/PTFE
PTFE top with two threaded connections. The standard PTFE frit has a pore size of approx. 3 µm and is screwed on the riser tube with an M8x1 thread. It can be exchanged with the PTFE gas distributor with fine bores which needs a lower primary pressure.Temperature resistance: from -200°C to 250°CTransparentUnbreakableFrit easily exchangeable
Griffin beakers, PFA
Transparent. With a raised scale. Excellent chemical resistance and very high thermal stability from -200°C to +260°CAutoclavable at 121°C (2 bar) according to DIN EN 285.The advantages of PFASpecially suitable for use in trace analysisIdeal for sensitive and valuable samplesLong-term maintenance of low-concentration reference materials in PFA containersNo memory effectsPractically no carryover, no contamination due to the extremely hydrophobic, anti-adhesive and smooth surfacesChemical inertness against nearly all chemicalsGood transparency and dimensional stabilityEasy to cleanUse of high purity raw materials
Griffin Beakers, PTFE
Griffin Beakers, PTFE are non-contaminating and completely inert to highly corrosive reagents. They are non-wettable, unbreakable, lightweight, and heat resistant. Easy to clean, these beakers have a broad spout for easy pouring. They can be heated on a hot plate up to 288°C when proper care is exercised. The specially molded bottom allows rapid heat transfer.Can be heated to 550°F (288°C) and used in a microwaveChemically resistant to acids and basesUltra-pure
Jars, PFA
PFA jars store solutions, paste and bulk materials with no concern about leaching, corrosion, contamination or evaporation. They are resistant to corrosive liquids, acids, solvents, sensitive reagents, and staining solutions. PFA jars feature a large mouth for easy access and non-stick surface for easy cleaning. There is an area for identification marking on the side of the jars. Stackable, these jars have a knurled top for secure grip to facilitate easy opening and closing.Chemically resistantUltra-pureHeat resistant and usable to cryogenic temperaturesSecondary inner seal design for safety and integrityIdeal for storing digestion samples
LLG-Beakers, low form, PTFE
Manufactured from high quality PTFE with excellent resistance to all chemicals. Manufactured from molded, pure PTFE with a smooth internal finish. Flat base enables a flat contact to the surface for effective heat transfer. PTFE beakers have excellent resistance to chemicals and temperature stability from -200°C to +260°C.
Measuring cylinders, graduated, PFA
These graduated cylinders offer all the advantages of non-stick inert fluoropolymers. PFA is temperature resistant from -196°C to 260°C and has the lowest metal ion content. As a result, Chemware® cylinders are excellent for trace metal analysis.Easy-to-read graduationsSmooth pouring, drip-free spoutBroad base for stability
Micro gas wash bottle, PFA
For use with small volumes up to 50 ml. The gas inlet tube (not included, please choose a hard-walled tubing) is inserted through the fitting on the top and can be fixed safely. The side fitting is used as gas outlet.Temperature resistant from -200 to 250 °CFDA conformNon-porousCan also be used as cold trap.Only suitable for presureless operation
Narrow-Mouth Bottle Nalgene™ Teflon™ PFA, with screw cap
Chemical and corrosion resistantTemperature resistant from -270 to +250 ° CLeak-proof Teflon ™ PFA screw capsAutoclavable
Narrow-mouth bottles Nalgene™ Type 1600, FEP with screw cap ETFE
Transparent. Teflon® FEP bottle with leakproof Teflon® ETFE screw cap. Highly resistant to chemicals, corrosion and temperature. Autoclavable - cap should be unscrewed and sat loosely on neck before autoclaving.Teflon® and Tefzel® are registered trademarks of DuPont.
Narrow-mouth bottles with cap, PFA
These unbreakable PFA bottles can be used for storage of virtually all corrosive chemicals, including hydrofluoric, nitric, and perchloric acids. PFA bottles are chemically inert, heat resistant with a non-stick, easy-to clean surface and are ideal for environmental sampling. The inert fluoropolymer cap liner ensures leak-proof sealing. Supplied with PFA caps.Ultra-pure, the lowest metal ion content of all fluoropolymersUnbreakableChemically inertNon-stick, easy to cleanUse for storage in pharmaceutical and semiconductor processing (intermediate stages)
Narrow-mouth bottles with screw thread
PFA. Transparent, with tightly sealing screw closure (saw-tooth thread). High temperature resistance from -200 to +250°C. Autoclavable at 121°C (2 bar) according to DIN EN 285.
Narrow-mouth wash bottles, Technical quality PFA
These bottles include components made of reprocessed PFA material from our production process. The tip opening can be enlarged by cutting.High temperature and chemical resistanceETFE screw capsFEP tube